About those Weird Plastic Pieces from Inside the Front Door Panel of a Bosch Dishwasher

Share this merde!

Earlier this year we had occasion to remove the front panel from the door of our Bosch dishwasher. The occasion was that it had developed a leak. Now fortunately, one of the most common reasons that a Bosch dishwasher will develop a leak – especially if it seems to be coming from under the door – is that the inlet water valve needs to be replaced. And also fortunately, it turns out that the water inlet valve is relatively easy to replace, once you take the door panel off. (In case you’re interested, this is the inlet water valve that we used to replace the leaking one – ain’t Amazon amazing?)

Well, as soon as that door panel came off of the front of that Bosch dishwasher, two weirdly-shaped plastic pieces literally fell out of the dishwasher, onto the floor (the floor of the kitchen, not the floor of the dishwasher). “Weird,” we thought, and set them aside, sure that it would be obvious where they went once we started putting the dishwasher back together.

Boy were we wrong.

What the hell was this thing?
About those Weird Plastic Pieces from Inside the Front Panel of a Bosch Dishwasher

At first we were misled by the apparent channels in the thing, which led us to think that it was some sort of harness for wiring. But, nope.

In fact, it took us quite a while to figure out what this thing was, but once we did, and once we actually figured out where it went, it was obvious. Dumb, but obvious. Of course it’s obvious once you know, so that is why I wrote this up for you, so you will know, without going through the frustration that we did.

 

It’s a door spacer for your Bosch dishwasher!

Well, actually, it was obvious where they went – whether they are a door spacer, or something to protect the inside of the door from damage, or both, still wasn’t 100% clear. We are choosing to call it a door spacer.

But once you know what they are, where they go, and how they go, is obvious. So if you have found pieces that look like the above, here is how they go back in.

Inserting the door spacer protector back into your dishwasher
putting plastic door spacer back bosch dishwasher inserting

Notice the single prong on the plastic door spacer; once you insert the plastic piece as in the above picture, it will seat into place with a satisfying click.

putting plastic door spacer back bosch dishwasher seated click

This is what it will look like from above, once it is clicked in and fully seated.

View from above
putting plastic door spacer back bosch dishwasher view from above

And that’s all there is to it. It probably took you way more time to discover what those silly plastic pieces are than it will to shove them back in!

By the way, in case you’re wondering, this is what the inlet water valve looks like:

Bosch Dishwasher Inlet Water Valve
bosch dishwasher inlet water inlet valve

And, again, you can find them on Amazon here (although be sure to check that it’s compatible with your model, this is the one that worked for our model). It costs all of $12.50.

Reminder: I do not use affiliate links because I want you to know that if I am recommending something it's because I really use it myself and recommend it, and not for financial gain. And I try to offer helpful information as I find or figure it out. But it does cost me money out of my pocket to keep the site running (since 2006!), so if you find something I've written helpful, please consider letting me know via CashApp, Venmo, or Paypal.

CashApp us Square Cash app link

Venmo us Venmo link

Paypal us Paypal link


Searches that led to this article: https://www mangemerde com/about-those-weird-plastic-pieces-from-inside-the-front-door-panel-of-a-bosch-dishwasher/,  

26 thoughts on “About those Weird Plastic Pieces from Inside the Front Door Panel of a Bosch Dishwasher

  1. Thank you so much , this was exactly what I was hopelessly looking for!! I couldn’t believe it that this popped the first time I googled the picture of that plastic piece!!

  2. Where would I get replacements for these spacers? I lost mine the first time I replaced the control panel, (I’m on number 3 now). Only thing I don’t like about the dishwasher is the panels don’t seem to last.

  3. Thank you. Oh, this saved me! I was thinking I’d have to take the dishwasher apart all over again and figure out where the missing part is, but I found your post through a ham-fisted Google search. Yay!

  4. Many thanks Monsieur Merde! Found my dog munching on it while replacing a broken handle bracket. Couldn’t figure out what the dang thing was. Thanks for taking the time to post this!

  5. BROOOOO ive been struggling for the past 20 min tryna find this out and damn soo obvious now lol, thanks!

  6. Ok…so I replaced the water inlet valve and needed to take off the door panel. Those plastic pieces fell out. I put back the door panel without them. Do I need to remove the door and put them back on? Thanks

    1. They seem to stabilize the lower part of the panel, so I would, but I’m not a dishwasher repair person, that’s just my personal opinion. 🙂

  7. Yea! Your pic wins!! 10 hours online, emails, and lots of calls later, yet nobody (not even Bosch) cam help me ID the part or order it. In the meantime, my wife is pissed after a few days of the dishwasher door lying on the floor..

    Does ANYONE know what the part number truly is??

  8. WOW thank you. Those are exactly what my weird floor pieces look like, and they didn’t show up on any searches on diagrams! In fact, weirdly, your photo was what led me to this article, through Google. This wins the internet for today.

Leave a Reply

Your email address will not be published.